help

default-banner.png

PRODUCTS SEARCH

Product Range

Security Rating

PHOTO GALLERY

WORKING MANUALS

Complete and up-to-date content of our once printed manuals is now available to download from this website. To access this content simply click “Register to Download” for a one-time registration.

Non-Certificated Access Covers

Non-Certificated Access Covers

  • Type US/H/A/S (Actuator)

    Multiple Leaf Actuator Upstand Access Covers

    Rating

    Type US/H/A/S (Actuator)

    Multiple Leaf Actuator Upstand Access Covers

    Typical Applications

    Upstand actuator access cover system designed to provide full safe access via single electrically controlled entry door and electrically controlled hinged upstand access covers in combination with drop on cover lids if required.

    Depending on the required aperture internal clear opening size, these units can be a standard twin leaf (upstand hinged USH/2) or multiple leaf please contact our Technical Advisory Service for further information.

    Actuator upstand units can be roof or ground located over stair well to plant room housing general instrumentation equipment, telemetry systems or electrical control units etc.

    Upstand Hydraulic Actuator Unit

    Due to the sensitive nature of Asset Security you are required to register to enable datasheet downloads

    Register, login and download data sheet.


    Standard Product Features

    Electrically controlled entry door hinged left as standard with lever handle entry and (X1) thumb turn and lever handle exit.

    Single leaf door has heavy duty door hinges and weather sealing strip.

    Actuator unit has multi-point fixing points and turned out frame.

    Access cover lids are domed for water shedding and utilize integrated sealing bars between covers, (USD) drop on lids have T1 corner threaded lifting eyes. 

  • Type SHH1 (Biomass Fuel/Woodchip - Solid Top)

    Single Leaf Solid-Top Hydraulic Biomass Fuel/Woodchip Bunker Access Cover

    Rating

    Type SHH1 (Biomass Fuel/Woodchip - Solid Top)

    Single Leaf Solid-Top Hydraulic Biomass Fuel/Woodchip Bunker Access Cover

    Typical Applications

    Secure flush fitting solid-top hydraulic door/ access cover over woodchip bunker or other biomass material store or silo serving fuelled boiler systems for use in trafficked areas.

    Medium risk Blue Level 3 – Rural/Urban location with low/medium risk of vandalism. 

    Flush Woodchip Access Cover Unit

    Due to the sensitive nature of Asset Security you are required to register to enable datasheet downloads

    Register, login and download data sheet.


    Standard Product Features

    Single leaf, flush fitting, hinged, solid-top hydraulic access cover.

    Moated channel frame design with external water drainage/discharge.

    SoloLift – Single person operation compliant with Manual Handling Regulations.

    Range of safety and handling features to safeguard operatives.

    Woodchips/pellets are tipped onto safety grids beneath cover which must be in the closed position whilst tipping is in progress.

    Hinged safety grids allow woodchips/pellets to fall freely through while providing fall protection for operatives during loading.

    Grids are a split hinged design having torsion spring lifting mechanisms and are secured closed by lever-arm with padlocking facilities.

    • Grids open to left and right of the open cover to allow entry from the front edge

    • Built into the underside of each lid are deflector plates to guide woodchips/ pellets into the chamber away from hinges and springs.

    • All mild steel is hot dip galvanised after manufacture to BS EN ISO 1461.

    Please note: A minimum rebate of 150 mm deep × 300 mm wide is required on all four sides of the bunker chamber.

  • Type UNH2 (Biomass Fuel/Woodchip - Upstand)

    Twin Leaf Upstand Biomass Fuel Woodchip Bunker Access Cover

    Rating

    Type UNH2 (Biomass Fuel/Woodchip - Upstand)

    Twin Leaf Upstand Biomass Fuel Woodchip Bunker Access Cover

    Typical Applications

    Secure bunker access cover over woodchip or other biomass material store or silo serving fuelled boiler systems.

    Deep-sided upstand cover system for use in non-trafficked areas.

    Medium risk Blue Level 3 – Rural/Urban location with low/medium risk of vandalism. 

    Upstand Woodchip Bunker Access Cover

    Due to the sensitive nature of Asset Security you are required to register to enable datasheet downloads

    Register, login and download data sheet.


    Standard Product Features

    Twin leaf, end hinged upstand cover.

    Integral 250 mm high kick plate frame design turned out to all 4 sides.

    SoloLift – Stainless steel torsion springs and/or gas assisted rams enabling single person operation compliant with Manual Handling Regulations.

    Designed to open and close in a set sequence, the first opening leaf is secured using shrouded padlocking lever arm locking on both sides.

    Hand operated auto safety stays.

    Range of safety and handling features to safeguard operatives.

    Woodchips/pellets are tipped onto safety grids beneath cover which must be in the closed position whilst tipping is in progress.

    Hinged safety grids allow woodchips/pellets to fall freely through while providing fall protection for operatives during loading.

    Grids are a split hinged design having torsion spring lifting mechanisms and are secured closed by lever-arm with padlocking facilities.

    Domed lids for water shedding.

    Built into the underside of each lid are deflector plates to guide woodchips/pellets into the chamber away from hinges and springs.

    Naturally ventilated to help maintain required dry aerated conditions for enclosed wood-chip or wood-pellet storage.

    Protected internal anchoring points for effective security.

    All mild steel is hot dip galvanised after manufacture to BS EN ISO 1461.

  • Type RHH1 (Paviour Infill)

    Spring Assisted, Single Leaf, Hinged Paviour Infill Access Cover

    Rating

    Type RHH1 (Paviour Infill)

    Spring Assisted, Single Leaf, Hinged Paviour Infill Access Cover

    Typical Applications

    Flush fit cover system for use in trafficked paved areas where:

    Aesthetic finish is important.

    Public domain dictates anti-slip and anti-trip safety measures.

    DDA compliance is a design minimum.

    Frequent access to the chamber beneath by a single person is required.

    Fall protection options available.

    Medium risk Blue Level 3 – Rural/Urban location with low/medium risk of vandalism. 

    Single Block Infill Access Cover

    Due to the sensitive nature of Asset Security you are required to register to enable datasheet downloads

    Register, login and download data sheet.


    Standard Product Features

    Single leaf flush fitting access cover designed to take infill up to 50 mm thickness.

    Euro load classifications.

    Holding down anchor points for secure location of frame.

    Hidden hinges – protected against damage from vehicle loadings/ingress of grit, etc.

    Optional sealing strip underside cover.

    Torsion sprung lid for single person operation.

    Hand operated auto safety stay.

    Recessed padlock with anti-trip cover plate.

    Turn-catch locking.

    BSI sealed lifting keyholes.

    All mild steel is hot dip galvanised after manufacture to BS EN ISO 1461.

  • Type RHH2 (Paviour Infill)

    Spring Assisted, Twin Leaf, Hinged Paviour Infill Access Cover

    Rating

    Type RHH2 (Paviour Infill)

    Spring Assisted, Twin Leaf, Hinged Paviour Infill Access Cover

    Typical Applications

    Flush fit cover system for use in trafficked paved areas where:

    Aesthetic finish is important.

    Public domain dictates anti-slip and anti-trip safety measures.

    DDA compliance is a design minimum.

    Frequent access to the chamber beneath by a single person is required.

    Fall protection options available, see opposite.

    Medium risk Blue Level 3 – Rural/Urban location with low/medium risk of vandalism. 

    Twin Leaf Block Infill Access Cover

    Due to the sensitive nature of Asset Security you are required to register to enable datasheet downloads

    Register, login and download data sheet.


    Standard Product Features

    Twin leaf flush fitting access covers designed to take infill up to 50 mm thickness.

    Euro load classifications.

    Holding down anchor points for secure location of frame.

    Hidden hinges – protected against damage from vehicle loadings/ingress of grit, etc.

    Optional sealing strip underside covers.

    Torsion sprung lids for single person operation.

    Hand operated auto safety stays.

    Recessed padlock with anti-trip cover plate.

    Turn-catch locking.

    BSI sealed lifting keyholes.

    All mild steel is hot dip galvanised after manufacture to BS EN ISO 1461.

  • Type RHHM (Paviour Infill)

    Spring Assisted, Multiple Leaf, Hinged Paviour Infill Access Covers

    Rating

    Type RHHM (Paviour Infill)

    Spring Assisted, Multiple Leaf, Hinged Paviour Infill Access Covers

    Typical Applications

    Flush fit multiple-leaf cover system for use in trafficked paved areas where:

    Aesthetic finish is important.

    Public domain dictates anti-slip and anti-trip safety measures.

    DDA compliance is a design minimum.

    Frequent access to the chamber beneath by a single person is required.

    Fall protection options available, see opposite.

    Medium risk Blue Level 3 – Rural/Urban location with low/medium risk of vandalism. 

    Multiple Leaf Block Infill Access Cover

    Due to the sensitive nature of Asset Security you are required to register to enable datasheet downloads

    Register, login and download data sheet.


    Standard Product Features

    All multiple leaf covers are designed to specific customer and functional requirements to suit equipment position and safe operational use.

    Design considerations include:

    Operational requirements

    Aperture size

    Equipment size and position

    Fall protection

    Frequency of inspection/maintenance

    Sequential or non-sequential opening of covers

    Single operator requirements

    Site lifting facilities

    Loading

  • Type SD1/WW/PRESSURE

    Drop-on Flush Fitting Pressure Access Cover

    Rating

    Type SD1/WW/PRESSURE

    Drop-on Flush Fitting Pressure Access Cover

    Typical Applications

    Standard pressure cover unit for use in trafficked areas. 

    Designed to stop flood water exiting a chamber (upward pressure).

    Can also be used to prevent flood water ingress.

    Fall protection options available.

    Due to the sensitive nature of Asset Security you are required to register to enable datasheet downloads

    Register, login and download data sheet.


    Standard Product Features

    Solid top, flush fitting, non-hinged, drop-on, chequer plate, single leaf access cover.

    Euro load classifications.

    Recessed folded channel frame with secure holding down bolt fixing holes.

    One piece neoprene sealing gasket.

    4 corner threaded lifting points for mechanical lifting eyes.

    Evenly spaced stainless steel (grade 316) M16 perimeter fixings and phosphor bronze captured nuts.

    All mild steel is hot dip galvanised after manufacture to BS EN ISO 1461.

  • Type SHH1/WW/PRESSURE

    Pressure Tight Flush Fitting Hinged SoloLift Access Cover (Padlockable)

    Rating

    Type SHH1/WW/PRESSURE

    Pressure Tight Flush Fitting Hinged SoloLift Access Cover (Padlockable)

    Typical Applications

    Hinged pressure cover unit for use in trafficked areas. 

    Designed to stop flood water exiting a chamber (upward pressure).

    Can also be used to prevent flood water ingress.

    Fall protection options available.

    Due to the sensitive nature of Asset Security you are required to register to enable datasheet downloads

    Register, login and download data sheet.


    Standard Product Features

    Solid top, flush fitting, hinged, chequer plate, single leaf access cover.

    Recessed padlocking box with anti-trip cover plate.

    Recessed folded channel frame with secure holding down bolt fixing holes.

    Hidden hinges – protected against damage and ingress of grit, etc. 

    Torsion sprung lid for single person operation.

    Hand operated auto safety stay.

    Evenly spaced stainless steel (grade 316) M16 perimeter fixings and phosphor bronze captured nuts.

    One piece neoprene sealing gasket.

    Euro load classifications.

    All mild steel is hot dip galvanised after manufacture to BS EN ISO 1461.

  • Type USD1/WW/PRESSURE

    Drop-on Upstand Pressure Access Cover

    Rating

    Type USD1/WW/PRESSURE

    Drop-on Upstand Pressure Access Cover

    Typical Applications

    Standard upstand pressure cover unit for use in non-trafficked areas. 

    Designed to stop ingress of flood water into chamber.

    Due to the sensitive nature of Asset Security you are required to register to enable datasheet downloads

    Register, login and download data sheet.


    Standard Product Features

    Upstand, non-hinged, drop-on, single leaf domed access cover.

    Side frame turned out to all 4 sides with secure holding down fixing holes.

    One piece neoprene sealing gasket.

    4 corner threaded lifting points for mechanical lifting eyes.

    Evenly spaced stainless steel (grade 316) M16 perimeter fixings and phosphor bronze captured nuts.

    All mild steel is hot dip galvanised after manufacture to BS EN ISO 1461.

    OPTIONS

    Fall protection options available.

    Available in chequer plate or stainless steel.

  • Type USH1/WW/PRESSURE

    Single Leaf Hinged Upstand Pressure Access Cover

    Rating

    Type USH1/WW/PRESSURE

    Single Leaf Hinged Upstand Pressure Access Cover

    Typical Applications

    Standard hinged upstand pressure cover unit for use in non-trafficked areas. 

    Designed to stop ingress of flood water into chamber.

    Due to the sensitive nature of Asset Security you are required to register to enable datasheet downloads

    Register, login and download data sheet.


    Standard Product Features

    Upstand, hinged, single leaf access cover.

    Side frame turned out on hinged side only with secure holding down fixing holes.

    External hinges.

    Torsion sprung lid for single person operation.

    Hand operated auto safety stay.

    One piece neoprene sealing gasket.

    Evenly spaced stainless steel (grade 316) M16 perimeter fixings and phosphor bronze captured nuts.

    All mild steel is hot dip galvanised after manufacture to BS EN ISO 1461.

    OPTIONS

    Fall protection options available.

    Available in chequer plate or stainless steel.

default-rh-main.png

Please REGISTER if you require technical datasheets on any of our products.

For technical assistance on any of our products please use the HELP button.

For details of access cover fall protection options click here.